eLine Technology SIP-VD-R - Manual (Page 14)

17 18
Configuring Connection
Step 3 of 6: Locate your camera’s MAC address:
1. Open a web browser and enter the camera’s IP address in the address
bar in the following format:
http://
http:// 192.168.0.120 : 80
IP address
Colon
HTTP port number
2. Under User Name and Password, enter the camera’s User Name
(default: admin) and Password (default: admin) and click Login.
3. Click Device Info and write down the MAC Address.
MAC Address
Step 4 of 6: Register for DDNS:
Register for one of the DDNS services which are currently supported for use
with your IP camera. A DDNS account allows you to set up a web site
address that points back to your local network. The following outlines how to
set up your free DDNS account.
NOTE: Your router must support UPnP to enable DDNS.
NOTE: You may use the same DDNS account for multiple IP cameras on
the same LAN.
Configuring Connection
Step 5 of 6: Enable DDNS on the camera:
1. Enter the camera’s IP address in your web browser. Log in and then click
Network Service>DDNS.
2. Check Enable DDNS.
3. Configure the following:
• Provider: Select the ddns service you use..
• Domain Name: Enter the Domain Name you received from the
confirmation email you received after you created your DDNS account
(e.g. mycamera.dyndns.org).
• User Name: Enter the User Name.
• Password: Enter the account name Password
4. Click OK to save settings.
Step 6 of 6: Connect to the camera’s DDNS address:
1. Enter the camera’s DDNS address in your web browser in the following
format:
http://
http://mycamera.dyndns.org:80
Colon
DDNS address HTTP port number
2. Under User Name and Password, enter the camera’s User Name
(default: admin) and Password (default: admin) and click Login.
Once you have logged into your system using your DDNS address, you can
connect to the IP camera from a remote location using a web browser,
NVMS.
eLineTechnology.com