eLine Technology SNI-Viewer - Manual (Page 2)

1
Viewer-10 is for client side. It can construct an independent C/S system with IP cameras and
Dserver, it can also construct an independent C/S system with NVR.
1. 1. 1. 1.Login Login Login Login（Setup Setup Setup Setup）
Input account, password, server IP and port. Then click on “Login”.
1.1 1.1 1.1 1.1 Login Login Login Login account account account account source source source source
There are different source for login account:
1、 The account is created in NVR. Port is set in the “port of media server” of NVR. Server IP is
the same at the local PC IP address. If that is not public IP address, you will need to do port
mapping.
2、 The account is registered on the server. The default server is “Taiwan1”, port 3478. For this
account can also be used through internet.(For example, you can login
http://pc.easyipcam.com ， with account and password,demo/demo. You can also login
viewer-10 with demo/demo ,server IP “Taiwan1”, Port 3478）
3、 You can login single IP Cam directly. The default account is guest. Password, server IP, and
port are set in the “Network” of Setup.
eLineTechnology.com Viewer-10 User Manual email [email protected]