eLine Technology EDC User Manual - Manual (Page 7)

CAMERA ELI‐EDC USER MANUAL eLineTechnology.com
Page | 7
Adjusting the Camera
1. To adjust the camera angle, remove the white casing and dome by pressing on the latch release
indicated by the arrow, and prying off the casing. The first time you remove the casing, it may be
a little tight.
2. The camera lens can be moved by twisting the black shell inside the white base. The camera
module inside the black shell can be moved up and down. There is no need to remove any
screws or to attempt to disassemble the camera.
3. To replace casing, align the arrow with the latch release and press on.
Focusing
Focus Control Zoom Control
1. Focusing the camera is done by adjusting the two screws just above the lens.
2. The screw on the left will adjust the lens focus.
3. The screw on the right will adjust the lens zoom.
4. Focus to the depth of field that is most important.