eLine Technology EDC User Manual - Manual (Page 3)

CAMERA ELI‐EDC USER MANUAL eLineTechnology.com
Page | 3
Product Description
3‐Axis Indoor Mini IR Dome
Congratulations on your purchase of this product. This analog surveillance dome features advanced
functions in a compact body and is suited for tight, indoor environments such as a corridor or elevator.
The camera utilizes advanced Sony image sensor technology producing high definition, realistic color.
Features
 Indoor plastic mini dome housing
 Infrared LEDs for night vision
 3‐Axis bracket for versatile positioning of the lens
 On‐Screen Display (OSD) menu controlled by cable button
 Low Light Illumination, Sense‐UP, Digital Wide Dynamic Range (WDR), 3D Noise Reduction
(3DNR)
 12V DC
Models
Model Number Resolution Lens Features
ELI‐EDC‐65‐312IR 650 TVL 2.8~12mm Varifocal Infrared
Safety Information
1. Read these instructions.
2. Heed all warnings.
3. Follow all instructions.
4. Clean only with dry cloth.
5. Do not block any ventilation openings.
6. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus including amplifiers)
that produce heat.
7. Only use attachments/accessories specified by the manufacturer.
8. Pay attention to the power requirements.
9. Stop operation immediately when something is wrong with the product. If smoke or the smell of smoke comes from
the product, continued use will result in fire, injury, or damage to the product.
10. Turn the power off immediately and contact qualified service personnel for service.
11. Be sure to turn off the power before wiring. Failure to observe this may cause electric shock. A short circuit or wrong
wiring may cause fire
12. This product has no power switch. Turn the power off when cleaning the product.
13. When continuously viewing a bright light source such as a spotlight, the color filter of the CCD may have deteriorated
and it may cause discoloration. Even when changing the fixed viewing direction after continuously viewing a spotlight
for a certain period, the discoloration may remain.
14. Keep the camera cable away from the lighting cable. Failure to observe this may cause noise.
15. When the camera is used near a TV/radio antenna, strong electric field, or magnetic field (near a motor or a
transformer), images may be distorted and audible noise may be produced. In such a case, route the camera cable
through specialized steel conduit tubes.