Dynasonics DXN Portable Ultrasonic Measurement System Firmware Update - Manual (Page 6)

Series DXN
Launch Updater
Rev G
dynasonics.com 800-535-3569 ©2012 Racine Federated Inc., all rights reserved
Start Flowmeter
Start Updater
Flowmeter Administration Tools
10 Press the Unlock button (Step 1: Unlock System (Reboot)
dynasonics.com 800-535-3569 ©2012 Racine Federated Inc., all rights reserved
Check Update Status Quit Update Utility Restart System
Step 1: Unlock System (Reboot)
Step 3: Copy Updated Files
Step 2: Update System (Reboot)
Step 4: Update Flowmeter
Step 5: Lock System (Reboot)
UD: XKey1 exists
UD: SR value is 0
UD: Eth Services IP=192.168.0.100 Subnet = 255.255.255.0
UD: Folders
UD: Registry
C:\Documents and Settings\FlowMeterUser> ewfm
Protected Volume Configuration
Type RAM
State ENABLED
Boot Command NO_CMD
Param1 0
Param2 0
Presistent Data “”
Volume ID C7 A2 27 25 00 7E 00 00 00 00 00
Device Name “\Device\HarddiskVolume1” [C:]
Max Levels 1
Clump Size 512
Current Level 1
Memory used for data 6432256 bytes
Memory used for mapping 16384 bytes
Unlock
Lock
Update
Flowmeter
Copy
ORDEM & PR OGRE SSO
Update
System
11 A small panel in the center of the screen asks if it is OK to reboot Remove the
USB Update Drive and then press the OK button
×
OK
Reboot
DXN Portable Ultrasonic Measurement System
Page 6 May 2013