2 6.2.2 red hat red hat red hat red hat red hat, Linux 9.0 – Asus Motherboard P5MT-M User Manual
Page 143
A S U S P 5 M T - M
A S U S P 5 M T - M
A S U S P 5 M T - M
A S U S P 5 M T - M
A S U S P 5 M T - M
6 - 9
6 - 9
6 - 9
6 - 9
6 - 9
6.2.2
6.2.2
6.2.2
6.2.2
6.2.2 Red Hat
Red Hat
Red Hat
Red Hat
Red Hat
®
®
®
®
®
Linux 9.0
Linux 9.0
Linux 9.0
Linux 9.0
Linux 9.0
Follow these instructions when installing the Broadcom
®
Gigabit LAN
controller base driver for the Red Hat
®
Linux version 5.2.x operating
system. The following procedures were tested for 2.4.x kernels through
2.4.20.
Installing the source RPM package
Installing the source RPM package
Installing the source RPM package
Installing the source RPM package
Installing the source RPM package
To install the source RPM package:
1.
Install the source RPM package:
rpm -ivh bcm5700-
2.
Change the directory to the RPM path and build the binary driver for
your kernel:
cd /usr/src/{redhat,OpenLinux,turbo,packages,rpm ..}
rpm -bb SPECS/bcm5700.spec or rpmbuild -bb SPECS/
bcm5700.spec
The RPM path is different for different Linux distributions.
3.
Install the newly built package (driver and man page):
rpm -ivh RPMS/i386/bcm5700-
You need the force option when installing the driver on some
distributions that has an older version of the driver.
For 2 . 2 . x k e r n e l s
2 . 2 . x k e r n e l s
2 . 2 . x k e r n e l s
2 . 2 . x k e r n e l s
2 . 2 . x k e r n e l s, the driver is installed in:
/lib/modules/
For 2 . 4 . x k e r n e l s
2 . 4 . x k e r n e l s
2 . 4 . x k e r n e l s
2 . 4 . x k e r n e l s
2 . 4 . x k e r n e l s, the driver is installed in:
/lib/modules/
bcm5700.o
For 2 . 4 . x k e r n e l s
2 . 4 . x k e r n e l s
2 . 4 . x k e r n e l s
2 . 4 . x k e r n e l s
2 . 4 . x k e r n e l s w i t h b c m 5 7 0 0 d r i v e r p a t c h e d i n
w i t h b c m 5 7 0 0 d r i v e r p a t c h e d i n
w i t h b c m 5 7 0 0 d r i v e r p a t c h e d i n
w i t h b c m 5 7 0 0 d r i v e r p a t c h e d i n
w i t h b c m 5 7 0 0 d r i v e r p a t c h e d i n, the driver
is installed in:
/lib/modules/
bcm5700.o
o r
o r
o r
o r
o r
/lib/modules/
bcm5700/bcm5700.o
4.
Load the driver:
insmod bcm5700
5.
Refer to Linux distribution documentation to configure the network
protocol and address.