Datamax-O'Neil PrintPAD MC70 User Guide - Manual (Page 5)

2
PRINTPAD MC70 USER'S GUIDE
Using Batteries: General Guidelines

The printer ships with two batteries installed, but
they are not operational. Before operating the
printer, remove the two red, battery isolator
labels either by gently pulling the labels out, or
by lifting the batteries up.

If you are storing your printer for a long period
of time or shipping it, reinstall the battery
isolator labels.

Both batteries must be installed for your printer
to operate properly.
Installing and/or Replacing Batteries
1. Open the printer by unsnapping the latch on the
front of the case (Figure 1).
2. Lift the battery cover up by pushing the retainer clip
inward with your finger (Figure 2).
3. Lift up the outside end of the battery to remove it.
Figure 1
Figure 2