Datamax-O'Neil LP3 LABEL PRINTER User Guide - Manual (Page 9)

S
ETTING
U
P
Y
OUR
P
RINTER
6
Determining the Batteries' Condition
The battery status LED displays the batteries' condition. When
the battery status LED is solid red, the batteries must be
charged; when solid orange, the batteries are at low power;
when solid green, the batteries are charged. The batteries'
voltage varies between 6.2 and 8.4 volts.
For information on battery error conditions, see Using the
Control Panel on page 15 .
Caution: There is a risk of explosion if the battery is
replaced by an incorrect type. Dispose of used
batteries according to the instructions.
Caution: The operating temperature of this portable
printer is 45° C. However, the operating temperature
when used with Datamax-O’Neil power supply part
number 220240-100 for charging the portable printer
is limited to 40 degrees C. Please charge the printer in
a suitable location that meets this temperature
requirement.
Caution: Please only use the Datamax-O’Neil part
number 220240-100 power supply with this product.
Battery 1
Battery 2
Figure 12