beautypg.com

Datamax-O'Neil APEX 4 User Guide User Manual

Page 19

background image

15

3.5 Bluetooth Communications

For Bluetooth operation: Dip Switch #1 must be in the position. Dip Switch #2

must be in the position.

Note: Adjust baud rate settings to match those of the Bluetooth module in your computing

device.

The printer can be powered up by pressing the power switch.

Pressing the power switch again will turn the printer .

Note: It is necessary for the mobile computing device you are using to discover and pairing the

printer to establish Bluetooth communication.

Note: Systems Integrators: Refer to the Bluetooth manual provided with your mobile computer

and the Bluetooth section of the APEX 4 Developer’s Manual


3.6 802.11 Communications (Option)

For 802.11g operation: Dip Switch #1 must be in the position. Dip Switch #2

must be in the position.

Note: Adjust baud rate settings to match those of the 802.11 module in your computing device.

The printer can be powered up by pressing the power switch.

Pressing the power switch again will turn the printer .

Note: It is necessary that the 802.11b/g settings match the settings of your wireless network

(Infrastructure or Ad-Hoc mode). Refer to the instructions provided by the network
administrator.

Note: Systems Integrators: Refer to the Developer’s Manual for a detailed description of the

default Wi-Fi settings of the APEX 4.


3.7 Serial RS232 (Option)

All Dip Switches must be in the position.

The printer can be powered up by pressing the power switch.

The standard communication speed is 115200 bps. Refer to

Table 2

for a description of

the bit parity settings.

Pressing the power switch again will turn the printer .