5 specifications, 1 printer specifications, 2 supply specifications – Datamax-O'Neil ANDES 3 User Guide User Manual
Page 29
25
5 Specifications
5.1 Printer Specifications
Height:
2.5 inches (64mm)
Width:
6.5 inches (167mm)
Length:
7.5 inches (192mm)
Weight: w/battery & supply
1.8 lbs. (850g)
Shipping weight:
3.3 lbs. (1.5kg)
Power:
7.4 V Li-Ion battery
Operating Temp. Limits:
32F to 122F (0 to 50C)
Storage Temp. Limits:
-4F to 140F (-20C to 60C)
Operating Humidity Limits:
20% to 85% non-condensing
Storage Humidity Limits:
5% to 95% non-condensing
Print Width:
4 inches wide (104mm)
203 dpi (8 dots per mm)
Printing Method:
Thermal Direct
Print Speed:
Up to 3.0 inches/sec. @ 7.2v to ph.
Supported Fonts:
(Bitmap)
Standard (normal and bold)
Large (normal)
Reduced (normal and bold)
Large rotated.
Supported Bar Codes:
Codabar, Code 39, UCC/EAN – 128, UPC/EAN/JAN, Interleaved 2 of
5, Code 128
Memory: 2M
Flash
768K SRAM --- (256K int. -- 512K ext.)
Charging Time:
Approximately 180 minutes
Communications: RS-232,
IrDA, Bluetooth, 802.11b
Print Ratio:
25% black maximum/sq. in.
5.2 Supply Specifications
Supplies:
Thermal direct receipt paper
Supply Thickness:
2.2 to 3.5 mils (receipt paper)
Supply Width:
4.33 inches (110mm)
Supply Length:
1 roll of receipt paper is ~100 ft. (30km.)
Supply Sensing:
Black mark (on face of supply)
Paper roll diameter:
Outside: 2.0 inches (51 mm)
Inside: 0.40 inches (10 mm)
Approved Vendors
Kansaki: P300, P310, P350, P354, P390, P530UV, TO281CA, OP200,
TO381N, F180, F380, F550
Jujo: TF-50KS-E2C
Honshu: FH65BV-3