Datamax-O'Neil ANDES 3 User Guide - Manual (Page 20)

16
Table 5 shows the International and PC Line Character sets from 32 through 255.
Table 5: International and PC Line Draw Character Set
3.7.4 Printer Graphic Commands
Command String Printer Action
ESC - ‘a’ – n Select dot line spacing between printed lines.
ESC - ‘J’ – n Graphic Line Feed command
ESC - ‘P’ - ‘#’ Select Online mode, characters printed as received.
ESC - ‘P’ - ‘$’ Select Buffer mode, characters are printed on (^ D)
ESC - ‘V’ - n1 – n2 8-bit Graphic command
ESC - ‘v’ - n1 – n2 RLE Compressed Graphic command
3.7.5 Magnetic Card Reader Control Commands (When MCR is installed)
Command String Printer Action
ESC - ‘M’ - ‘nnm’ – Cr
Select MCR with (nn) auto timeout Where nn=”00” to “99”
m=1: Reads track 1 only
m=2: Reads track 2 only
m=3: Reads track 3 only
m=4: Reads track 1 & 2
m=5: Reads track 2 & 3
m=6: Reads track 1, 2 & 3
ESC – ‘C’ Cancel MCR read process