Covm, Covm (central office voicemail), Covm reset – AT&T SB67138 User Manual
Page 55
Use this feature when the telephone indicates there is new voicemail but
there is none. For example, when you have accessed your voicemail while
away from the building. This feature only turns off the
COVM indicator; it
does not delete your voicemail messages. As long as you have new voicemail
messages, your telephone service provider continues to send the signal to
turn on the indicator. You can reset
COVM indicators individually or for all
the telephone lines using the
All COVM reset command.
When the telephone is idle, press
MENU
/ENTER
.
Press or to scroll to
COVM. Press
MENU/
ENTER.
Press or to scroll to
COVM reset. Press
MENU/
ENTER.
Press or to scroll to
COVM 1 reset-COVM 4 reset
to clear the
COVM indicator of a telephone line, or scroll
to
All COVM reset to clear the indicators for all the line.
Press
MENU/
ENTER to execute the command and return
to the previous menu. There is a confirmation tone. To
exit without making changes, press
EXIT.
NOTE: For information about using your voicemail service, contact
your telephone service provider for assistance.
1.
2.
3.
4.
5.
COVM (central office voicemail)
If you subscribe to voicemail service with your
telephone service provider, turn on the
COVM feature.
This feature displays
COVM on the screen above
the line key of any telephone line that receives new
voicemail messages.
If you do not subscribe to voicemail service or want to disable the indicator,
turn off the
COVM feature.
When the telephone is idle, press
MENU
/ENTER
.
Press or to scroll to
COVM. Press
MENU/
ENTER.
Press
MENU/
ENTER again to select COVM on/off.
Press or to select
On or Off.
Press
MENU/
ENTER to save the setting and return to
the previous menu. There is a confirmation tone. To exit
without making changes, press
EXIT.
COVM reset
1.
2.
3.
4.
5.
COVM on/off
COVM reset
>
Ringer setting
Mailbox setup
Base setup
COVM
>
COVM
:On
ENTER=Save
COVM on/off
COVM reset
>
*: Base
0 Missed calls
2:43PM 1/13
COVM COVM
Telephone base operation
COVM
49
COVM 1 reset
COVM 2 reset
COVM 3 reset
COVM 4 reset
>
COVM reset
COVM 2 reset
COVM 3 reset
COVM 4 reset
All COVM reset
>