AT&T SB67138 - Manual (Page 26)

Area codes
Use this feature to program this system to recognize one home area code
and up to four local area codes. This feature makes it easy for you to place a
call from the caller ID log.
If you dial seven digits to make a local call (no area code required), enter
your area code into the telephone as the home area code. When you receive
a call from within your home area code, the caller ID information only
displays the seven digits of the telephone number, and when you dial from
the call log, only seven digits are dialed.
If you must dial 10 digits (the area code and telephone number) for local
calls, enter
000 for the home area code and enter your area code as a local
area code. Then, if you receive a call from within your area code, the screen
displays all 10 digits of the telephone number, and when you dial from the
call log, all 10 digits are dialed.
If you have more than one area code for your region, enter those area codes
as local area codes.
When the telephone is idle, press MENU
/ENTER
.
Press or to scroll to Base setup. Press
MENU/
ENTER.
Press or to scroll to Area codes. Press
MENU/
ENTER.
Press or to scroll to Home area or Local area 1-
Local area 4. Press
MENU/
ENTER to edit it.
Use the dial pad keys to enter a three-digit area code.
Enter
000 for your home area code if you always dial
ten-digit numbers. Press REP or SKIP to scroll to
the digit you want to edit, or press REMOVE once to
delete a digit; press and hold REMOVE to delete
all digits.
Press
MENU/
ENTER to save the setting and return to the
previous menu. There is a confirmation tone. To exit without
making changes, press
EXIT.
1.
2.
3.
4.
5.
6.
Home area:
000
Call log
Ringer setting
Mailbox setup
Base setup
>
Language
Line selection
Set line mode
Area codes
>
Home area
Local area 1
Local area 2
Local area 3
>
Enter code:
000
ENTER=Save
Getting started
Telephone base setup
20