AT&T SB67138 - Manual (Page 23)

Ring group
Use this feature to specify which extensions receive incoming calls. By
default, all extensions and the telephone base receive incoming calls. You
can block some extensions from receiving calls, however, they can still be
used to make outgoing calls.
When the telephone is idle, press MENU
/ENTER
.
Press or to scroll to Ringer setting. Press
MENU/
ENTER.
Press or to scroll to Ring group. Press
MENU/
ENTER.
Press REP or SKIP to select a desired line (L1, L2, L3
or L4) while Ring group flashes.
Press or to scroll to Extension number:, use
the dial pad to press the number of the extension
(*,1,2,3,4,5,6,7,8,9,0) that you want to delete, or press
the number again to add it back to the ring group.
Press
MENU/
ENTER to save the setting and return to
the previous menu. There is a confirmation tone. To exit
without making changes, press
EXIT.
NOTE: The symbol * represents the telephone base; 0 represents extension 10.
1.
2.
3.
4.
5.
6.
Directory
Call log
Ringer setting
Mailbox setup
>
Ringer volume
Ringer tone
Ring group
>
Ring group: L3
Extension number:
*1-3-56-8-0
ENTER =Save
Ring group: L3
Extension number:
*1234567890
<>
Getting started
Telephone base setup
17
Do not disturb (DND)
Use this feature to silence your telephone base. When you activate the do
not disturb function, the icon appears on the telephone base screen and
you will not hear paging tones, voice paging or incoming call rings.
Instead, the LINE 1-LINE 4 indicator flashes to signal an incoming call. If you
receive an intercom call, the extension number of that intercom call appears
on the screen display.
Press DND twice to prevent interruptions. The DND
indicator turns on.
Press DND again to resume normal call alerts. The DND
indicator turns off.
1.
2.
*: Base
0 missed calls
5:12PM 4/27