AT&T SB67138 - Manual (Page 17)

Getting started
Add and register desksets
The handset provided with your SynJ SB67138 is already registered as
Handset 1. Additional desksets are assigned numbers in the order they are
registered (
Deskset 2 to Deskset 10).
Start registration when the handset screen shows Press
MENU on MAIN base, select Registration & then Register
HS. Then press Start.
To register a deskset to your telephone base
1. The SynJ SB67148 deskset shows
Press MENU on Main
base, select Registration & then Register HS. Then press
Start. before you begin registration.
2. On the main telephone base, press MENU
/ENTER.
3. Scroll down to Registration and press
MENU/
ENTER.
4. Press
MENU/
ENTER again to select Register HS.
5. Press the Start softkey on the unregistered deskset. The
telephone base screen shows Registering new device...
It takes up to 60 seconds to complete the registration.
You hear a beep when the registration is successful.
The telephone base shows
Deskset registered and the
deskset shows X:Deskset X (X represents the extension
number [ 1-0]; Deskset X represents the deskset name).
NOTE: If the registration is not successful, the telephone base screen
displays
Registration failed with an error tone. Try the registration
process again.
Press MENU on
MAIN base, select
Registration &
then Register HS.
Then press Start
SB67138:
SB67148:
COVM
Speed dial setup
Customer support
Registration
>
Registration
Deregistration >
Registering
new device...
Deskset
registered
2:Deskset 2
Set date & time
Menu Redial
11