Advent TOCMR-OE100 User Manual
Page 8

8
Audio Adjustments:
1. Press the unit’s front panel SEL TUNE button or press SEL on either the front or
rear remote control to access the Equalizer Control Menu.
2. Press and hold either the left/right cursor buttons to move the highlight on the
feature to be adjusted to a negative or positive value. To left of the cursor but-
tons is a numerical value for the feature being adjusted.
The Equalizer Control menu can be accessed by pressing the front panel SEL TUNE
button or by pressing SEL on either the front rear remote control.
Main Menu:
The Main Menu can be accessed by pressing the front panel MENU button or
by pressing MENU on the front panel remote control. The Main Menu allows the
selection of function source for the front and rear zone. The function source can
be selected by pressing the front panel buttons, the function icon on the units
front panel screen or using the front remote control. When using the front remote
control press the MENU button. The Main Menu will be displayed. The various
function sources can be selected using the cursor buttons to highlight the func-
tion and then pressing the OK button.
System Reset:
To correct a system halt or other illegal operation, use the tip of a pen to press the
reset button located on the front top right corner of the unit.
Setting The Clock:
The clock time can be set using the following procedure. Access the Main Menu
by pressing the front panel MENU button or by pressing MENU on the front panel
remote control. Press the SETUP icon . Once in the SETUP menu press the CLOCK
icon. Once in the CLOCK submenu press the SET TIME icon. A keyboard will appear
on the screen. Using the keyboard enter the in time (HH:MM) format. Then press
AM or PM icon and press OK. The newly entered time will appear on the screen
at the Set Time icon. Press the 12/24 HOUR FORMAT icon and select the desired
fromat to display the time .