Advent TOCMR-OE100 - Manual (Page 12)

12
10. Once the Bluetooth main menu
appears on the unit’s front panel
the wireless phone and the unit
have paired.
11. In the event the unit and the wire-
less phone fail to pair or bond the
following screen will appear.
12. Press the RETRY icon. The wireless
phone will receive a prompt similar
to “Pairing request from _______
Accept? Yes or No “. The user should
answer Yes to the request.
13. Enter the PIN or Passkey for the unit
(1234). Acknowledge the unit’s PIN
or Passkey on the wireless phone by
pressing (ENTER, OK etc). Once the
Bluetooth main menu appears on
the unit’s front panel the wireless
phone and the unit have paired.
Managing Incoming Calls:
When connected to a Bluetooth phone,
the unit will mute audio output, pause
CD play, and change to the Bluetooth
screen below when a call is received.
The incoming phone number or as-
signed name for that number will appear
in the middle of the screen. An audible
tone will sound from the unit and a
graphic display will appear on the front
panel. If the incoming call has no caller
ID, the unit will display “Private Caller”.
Answering an Incoming Call:
To answer the call, press the icon.
For best reception, speak loudly and
clearly. The microphone is located on
the lower left side of the unit. To end
the conversation, press the icon.
Rejecting an Incoming Call:
Press the icon to reject an
incoming call. The call will revert to
your wireless phone and be left for
voice mail.
Making an Outgoing Call:
Outgoing calls can be performed in
two manners. The outgoing call can be
direct dialed using the front panel key-
pad or the by pressing the CONTACTS
icon, selecting a name and pressing the
phone number.
Direct Dialing:
1. Press the front panel MENU button
and then press the BLUETOOTH icon
to access the Bluetooth main menu.
The following screen will appear: