ALLIED Vision Technologies Manta G-917 - Manual (Page 57)

Manta Technical Manual V7.0.1
57
Specifications
Spectral sensitivity
Power requirements DC 8–30 V only via 12-pin HIROSE: external power supply needed
or
PoE models: compliant with Power over Ethernet IEEE 802.3at/af
Power consumption Typical 4 W (@ 12 V DC); PoE: typical 4.6 W
Dimensions 86.4 mm x 44 mm x 29 mm (L x W x H); including connectors, without tri-
pod and lens
Mass 150 g (without lens, PoE and non-PoE camera)
Operating temperature +5°C to +45°C ambient temperature (without condensation)
Storage temperature -10°C to +70°C ambient temperature (without condensation)
Regulations CE, FCC Class B, RoHS (2011/65/EU)
Standard accessories Monochrome: protection glass
Color: IR cut filter
Optional accessories Monochrome: IR cut filter, IR pass filter
Color: protection glass
Tripod adapter
On request Gigabit Ethernet network card, Gigabit Ethernet network cables
Software packages Free of charge, see http://www.alliedvisiontec.com/html
Note

All measurements were done without protection glass / with-
out filter.
The uncertainty in measurement of the QE values is
10%.
This is due to:
• Manufacturing tolerance of the sensor
• Uncertainties in the measuring apparatus itself (Ulbricht
sphere, optometer, etc.)
The measurements for Manta G-145B NIR in figure 21 and
figure 22 were done with a different method to illustrate the
effect of the NIR mode.
Feature Specification
Table 19: Specification Manta G-917B/C