CEMB USA N100 - Manual (Page 39)

CEMB N-Pro program (optional) 7 - 3
Enable the options ‘Search for the best driver in these paths’ and ‘Include this path in
the search’. Using the ‘Search’ button, select the ‘USB driver’ sub-folder from the one in
which the CEMB N-Pro software is installed. At this point press ‘Next >’.
At the end of this guided procedure, the ‘USB Serial Converter’ hardware should be
correctly installed.
Wait until the Windows application bar displays a new message:
- New hardware found
- USB Serial Port
and a second Found New Hardware guided procedure window appears.
Repeat exactly the same steps to install the ‘USB Serial Converter’ hardware.
Correct communication between the PC and the N100 – N300 instruments is now
possible.
Note:
To install the software and drivers correctly you must have administrator rights on
the PC used; this is possible when you login as the Administrator.