CEMB USA C71 (C) User Manual

Page 8

I 0410 -

5.2.1.1 - Static & combined modes

After calibration as per

STEEL OR ALUMINUM WHEEL RIMS. SPRUNG COUNTERWEIGHTS

, it is possible to modify the

position of the correction weights using the

ALU

buttons.

STATIC: Select by pressing ALU (5E)

Balancing of light alloy rims with application of adhesive weights

on the shoulders of the rims.

Combined balancing: adhesive weight on the outside and clip-on
weight on the inside.

Combined balancing: adhesive weight on the inside and clip-on

weight on the outside.

5.2.2 - Rims with internal counterweight

Slide out the gauge on the LH side, at the point where a weight is

to be fitted. Wait for the “beep”. Slide it out further towards the RH

side and wait for a second “beep”. The wheel balancer

automatically identifies ALU S mode.

Counterweight position automatically suggested

ALU

(5I) can be used to set the alternative position indicated.