CEMB USA C71 (C) User Manual

Page 3

640

1070

1167

I 0410 -

1 - General

1.1 - General safety regulations

-The

wheel balancer may only be used by duly authorized and trained personnel.

- The wheel balancer must not be used for purposes other than those described in the instruction manual.

- The wheel balancer must not be modified in any way except for those modifications made

explicitly by

the manufacturer.

- Do not remove the safety devices. Any work on the machine must be carried out by specialised personnel

only.

- Avoid using strong jets of compressed air for cleaning.

- Use alcohol to clean plastic panels or shelves (AVOID LIQUIDS CONTAINING SOLVENTS).

- Before starting the wheel balancing cycle, make sure that the wheel is securely locked on the flange.

- The machine operator must not wear clothes with flapping parts. Do not allow unauthorized personnel to

approach the wheel balancer when the cycle is running.

- Avoid placing objects in the base which could impair the correct operation of the wheel balancing machine.

1.1.1 - Standard safety devices

- Stop push button for stopping the wheel under emergency conditions.

- The wheel guard is not compulsory since the rotation speed is less than 100 min

-1.

1.2 - Field of application

The machine is designed for balancing wheels of cars, light commercial vehicles or motorcycles weighing less than 75 kg.

It can be operated in a temperature range of 0° to + 45° C.

1.3 - Overall dimensions

1.4 - Technical data

Single-phase power supply

230 V - 50/60 Hz

Protection class

IP 54

Max. power absorbed

1,5 KW

Breakaway Current

13 A

Balancing speed

< 100 min

-1

Max. resolution of measurement

1 gram

Position resolution

± 1.4 °

Average noise

< 70dB (A)

Rim-machine distance

0 - 270

Rim width setting range

1.5” - 20” or 40 - 510 mm

Diameter setting range

10” - 26” or 265 - 665 mm