CEMB USA C72_2SE (C) - Manual (Page 24)

I 0391 - 24 I 0391 - 25
40 mm
40 mm
GB GB
6.6.2 - Diameter gauge
E40 mm
Place the round part of the gauge terminal on the fl ange as shown
in the fi gure and press .
- The number 353 ± 1° appears on the left display .
- Turn the gauge downward position the round part of the gauge
terminal at 40 mm (radial distance) from the fl ange as indicated
in the fi gure.
- The number 256 ± 3° should appear on the left display.
- If not, press the button holding the gauge still at 40 mm:
the number 256 appears on the left display.
- Return the gauge to rest position.
In the event of incorrectly accessing the diameter gauge calibration
function, press to cancel it.