CEMB USA C75 (C) User Manual

Page 8

Text mode
Original mode

I 0381 - 8

I 0381 - 9

Cone

Spring

3.6 - Guard mounting and adjustment

a) Fasten the components to the base as illustrated in specific exploded view.
b) The position of the wheel guard when closed can be adjusted with relative screw accessible at the back. Correct

position is the one which keeps the tube exactly horizontal with wheel guard closed.

c) Check that the microswitch is held down when the guard is closed.
d) Adjust the angular position of microswitch control.

3.7 - Spacer WD

When balancing very wide wheels (9”), there is not enough space to turn the distance gauge. To withdraw the wheel
from the machine side, fit spacer WD on the adapter body and secure it with the standard issue nuts. When centring
the wheel with the cone on the inside, fit the other cone as a spacer to obtain spring thrust.