CEMB USA C88 (A) User Manual

Page 9

I 0607 - 9

4.3 - Automatic distance and diameter gauge

This gauge allows measurement of the distance of the wheel from the machine and the wheel diameter at the point of
application of the counterweight.
It also allows correct positioning of the counterweights on the inside rim by using the specifi c function
(

INDICATION OF EXACT CORRECTION WEIGHT POSITION

) which allows reading, on the monitor, the position

used for the measurement within the rim (for calibration,

CALIBRATION

4.3.1 - Distance gauge locking

The distance gauge is automatically locked when the adhesive weights have reached the correct application
distance. To release the gauge, lower it to below 10” diameter.

4.4 - Automatic width gauge (optional)

Width gauging is through a SONAR device which measures the distance of the wheel without mechanical contact,
merely by closing the guard and each time a valid measurement has been made with

AUTOMATIC DISTANCE AND

DIAMETER GAUGE

4.5 - Clock control

The wheel balancing machine is provided with a clock having a back-up of about one month with the machine
switched off. If the machine remains unused for a long period, check date and time settings when restarting (

CLOCK SET-UP

4.6 - Printer (option)

Used to print useful information for the vehicle, residual imbalance and eccentricity for the balanced tyre.

4.7 - TOUCH screen

The function keys are selected by pressing on the touch screen.

Touch the screen with the fi ngers only: never use the counterweight pincers or other pointed objects.

When the beep signal is enabled (

ACOUSTIC SIGNAL

), pressing of any push

button is accompanied by a “beep”.

4.7.1 - Cleaning the TOUCH screen

Use a soft cloth and NON-ABRASIVE commercial glass/plastic cleaning spray or ethanol or natural detergents.

DO NOT USE:

Organic solvents type nitro thinner
Turpentine
Petrol
Trichloroethylene
Acetone

►

▪

►

▪
▪
▪
▪
▪