J&M GT460 - Manual (Page 21)

Operators Manual
D3804 21
To Store Data Records on
a USB Flash Drive
1. Insert a good working USB flash
drive into the USB port on the
bottom of the indicator. Wait for
the indicator to acknowledge the
USB flash drive.
2. Press to transfer the data
record onto the USB flash drive.
Wait for data transfer to be
completed.
3. Press to transfer the field
and ID names onto the USB flash
drive. Wait for data transfer to be
completed.
4. Press .
5. Remove the USB flash drive from
the USB port.
Modify Field Names and ID
Using Grain Tracker
TM
software:
•
Upload data records from USB flash drive to the PC.
•
Delete field names that are already finished and clear their
accumulators.
•
Add new field names as needed.
•
Transfer the new field names, accumulators and ID names onto
the USB flash drive.
Note: To upload data to indicator, you must first create data files with field
names, ID names and accumulator values using Grain Tracker
TM
software.
2
4
3