J&M GW15t-1 - Manual (Page 9)

-9-
STEP - 16
STEP - 15
GC15
t
-1 G
ravity
W
aGon
a
ssembly
Install all three Inside Braces. Use (12) 8.8 M10 x 25 MM serrated flange hex head bolts, (12) M10
serrated flange hex head nuts, and (12) M10 washers to attach the braces to the shell body.
Install the Ladder. Using the given dimensions, drill two thru holes with an M10 bit. Once the
holes are drilled attach the ladder to the shell using (2) 8.8 M10 serrated flange hex head bolts and
(2) M10 serrated flange hex head bolts. Now using the bottom two holes as guides, drill two more
holes. Once the holes are drilled, finish installing the ladder by filling the last two holes with (2)
8.8 M10 serrated flange hex head bolts and (2) M10 serrated flange hex head bolts.
89.69 CM 60.32 CM
58.10 CM