J&M GW15t-1 - Manual (Page 6)

GC15
t
-1 G
ravity
W
aGon
a
ssembly
-6-
STEP - 9
Install the Opposite Dumpside Front Corner and the Front Corner Gusset. Use (16) 8.8 M10 x
25 MM serrated flange hex head bolts and (16) M10 serrated flange hex head nuts to attach the
corner and gusset to the shell body. Use (2) 8.8 M12 serrated flange hex head bolts and (2) M12
serrated flange hex head nuts to finish attaching the gusset to the shell body.
M12 x 25MM
M12 x 25MM
STEP - 10
Install the Opposite Dumpside Rear Bottom Panel. Use (20) 8.8 M10 x 25 MM serrated flange hex
head bolts and (20) M10 serrated flange hex head nuts to attach the panel to the shell body. Do
not install a bolt into the holes that are encircled.