3 tools, 4 machine requirements – Castle TSM-11 User Manual
Page 7

CASTLE, INC
TSM‐11 OWNERS MANUAL V1.4
Page 7 of 22
2.3 Tools
To complete assembly of Castle machine, you will require the following tools:
(1) 7/16” wrench or ratchet
(1) ½” wrench or ratchet
2.4 Machine Requirements
ELECTRICITY:
Your TSM-11 is designed to run on a 110 volt -15 AMP standard 3 prong power supply. 2 prong
power adapters are not recommended for use on this machine and could cause electric shock to
the user. Be sure your unit is properly grounded. See a qualified electrician if you are in question
about your electrical safety compliance.
Fig 3