2 inventory – Castle TSM-11 User Manual
Page 5

CASTLE, INC
TSM‐11 OWNERS MANUAL V1.4
Page 5 of 22
2.2 Inventory
Your TSM-11 will pocket any material you would normally rout. It is designed for material from
½” to 1 ½”. Use of materials thinner than ½” is not recommended. Every TSM-11 machine is
factory adjusted. If you should find a small amount of sawdust in the bottom of your TSM-11,
please don’t be alarmed. This is an indication that your machine has been factory tested prior to
shipping.
With your Castle machine, you should have received the following:
Fig 1