6 service and maintenance, 1 router bit replacement – Castle TSM-11 User Manual
Page 18

CASTLE, INC
TSM‐11 OWNERS MANUAL V1.4
Page 18 of 22
6 Service and Maintenance
In order to ensure productivity and longevity for your Castle Benchtop Screw Pocket Machine, it
is essential to follow a few simple steps. How often these steps are performed depends upon
the number of hours the machine is operated each day. As a general rule, operators should
visually inspect the machine at the start of each work shift in the following manner:
6.1 Router Bit Replacement
1.
Unplug the TSm-11 from the electrical outlet.
2.
Lay the machine on its back so the bottom of
the machine accessible. Loose the (2) locknuts
and remove the router motor.
3.
Remove the router bit using the wrenches provided. Insert the replacement router
bit until it is fully seated. Secure the router bit with
the collet wrenches.
Note:
If you prefer a slightly deeper cut, scribe a line on the supplied bit gauge to
help you remember the preferred depth to which the bit should be inserted.
Fig 30
Fig 31