Tuff Stuff RLP-200 Leg Press/Hack Squat User Manual

Page 3

afety

irst

Regardless of how enthusiastic you may be about getting on
your equipment and exercising, take the time to ensure that
your safety is not jeopardized. A moment’s lack of attention can
result in an accident, as can failure to observe certain simple
safety precautions.

1. Read, study and understand the Assembly Instructions

and all the warning labels on this product. Furthermore, it
is recommended to familiarize yourself and others with the
proper operation and workout recommendations for this
TuffStuff product prior to use. Some of this information
can be obtained in this Assembly Instructions, as-well-as
from your local TuffStuff Retailer.

2. It is imperative that you retain this Assembly Instructions

and be sure all warning labels are legible and intact.

Replacement of the Assembly Instructions and labels are
available from your local TuffStuff Retailer.

3. Consult with your physician before beginning any exercise

program.

4. Use proper discretion when children are present.

Fig. A

Caution: Be sure the Pull Pin’s nut is fully

fastened and the Pin is fully engaged into the selected
hole of the Adjustable Foot Plate (#2),

when setting

up the unit for the Leg Press Exercise.

5. Keep hands, limbs, loose clothing and long hair well out of

the way of moving parts.

6. Do not attempt to lift more weight than you can control

safely.

Inspect the Leg Press / Hack Squat for any sign of wear on
parts, hardware becoming loose or cracks on welds. If a
Problem is found do not use or allow the machine to be
used until defective part is repaired or replaced.

8. Pay special attention to the Pull Pin 1/2 X 3 1/2 (#63)

located on the

Carriage (#5). Be sure the Pull Pin’s nut is

fully fasten and the Pin is fully engaged into the selected
hole of the Adjustable Foot Plate (#2), when setting up
the unit for the Leg Press Exercise. See Fig. A.

9. When locking the Carriage (#5) in place, make sure the

locking mechanism is fully engaged. See Fig. B.

10. Before you add weight plates to the Carriage (#5), you

should fi rst set-up the unit for the desired exercise.

Fig. B

Caution: Make sure the locking mechanism

is fully engaged.

Safety Precautions

RLP-200 Leg Press / Hack Squat