Schreiber Chillers 15medWC - Manual (Page 7)

CONTROLS
The chiller enclosure is a single enclosure with two compartments. The upper section houses the
controller and pilot lamps. The lower section contains the main disconnect (non-fused) and all of
the high voltage components. The upper section can be opened for an operator to check the
control panel. The lower door is interlocked to disconnect.
The main controller has a built in 4 x20 LCD display. The remote terminal can be wall mounted
indoor. It is connected to the controller via a 6-conductor data cable. The cable has phone jack
style connections and150’ of the cable is provided. The remote terminal receives its power from
the main controller; therefore, no additional power supply is required
The controller has one digital input available for remote on/off. There are option BAS gateways
for TCP/IP, MODBUS, BAC-Net, and LON-works.