DE-STA-CO Output Overload Clutches Type F, FC, S, C, D, FC-SD, C-SD - Manual (Page 3)

CLUTCH TYPES
CAMCO clutches are designed to meet specific application
requirements. They are available in five basic designs.
TYPE C
• Clamped Hub
• Clamped Body
• Shrink Disc
A clutch coupling which can be mounted on Index Drives
without output flanges. They provide a positive, rigid
connection between two shafts.
.39C
2.3C
6.0C
11C
25C
41C
TYPE FC
• Flange Mounted Body
• Clamped Hub
• Shrink Disc
These clutch couplings flange mount to the ouput shaft
of the Index Drive and provide a keyed-clamped hub
connection to the driven shaft.
.39FC
2.3FC
6.0FC
11FC
25FC
41FC
LIMIT SWITCH
TYPE F
• Shaft Mounted Body
The type F Clutch flange mounts to
the output shaft of the Index Drive
and provides a mounting surface for a
dial plate, sprocket, gear, etc., result-
ing in a rigid, compact and accurate
connection to the driven member.
.39F
2.3F
6.0F
11F
25F
41F
140F
LIMIT SWITCH
DRIVEN MEMBER MAY BE DIAL
PLATE, SPROCKET, GEAR, ETC.
MOUNTING A
MOUNTING B
LIMIT
SWITCH
DRIVEN MEMBER MAY BE DIAL
PLATE, SPROCKET,
GEAR, ETC.
TYPE S
•Shaft Mounted
• Clamped Body
• Shrink Disc
The combination of a key and clamped
hub construction provides rigid and
backlash-free shaft connections. The
Type S clutch is designed to mount on
Index Drives without flanges.
.39S
2.3S
6.0S
11S
25S
41S
LIMIT
SWITCH
DRIVEN MEMBER MAY BE DIAL PLATE,
SPROCKET, GEAR, ETC.
MOUNTING A
DRIVEN MEMBER MAY BE DIAL PLATE,
SPROCKET, GEAR, ETC.
LIMIT SWITCH
MOUNTING B
TYPE D
• Flange Mounted
These units are designed to mount on CAMCO Index
Drives featuring large output mounting surfaces. The dial
plate rests directly on the Index Drive output flange,
providing the ultimate in stability and accuracy.
2.8D
4.0D
7.8D
18D
31D
32D
61D
130D
3
LIMIT SWITCH