DE-STA-CO P1700 User Manual
Page 14
12
SECTION 5: Adjustments (continued)
5.1.1. To adjust trip torque, remove locking setscrew. Use spanner wrench to adjust nut
position. Turn clockwise to increase torque or counterclockwise to decrease.
See Chart 2 for torque adjustment values.
5.1.2. Replace locking set screw after achieving required torque.
NOTE: 1) Total torque range in the different models is achieved by a combination of
different spring groups and applied pressure through the adjusting nut.
Chart 2 below shows the different torque ranges available for each spring group.
When reordering specify model number (e.g. RT3-6001, etc.) for your required
spring range.
2) If a tamper proof setting is desired, apply a permanent adhesive, such as
Loctite
®
680, to the setscrew after achieving the required trip torque value.
5.1.3. Spring Sets for RT Clutches
CHART 2
RT CLUTCH
RT3-6001
RT3-6002
RT3-6003
RT3-6004
RT5-6001
RT5-6002
RT5-6003
RT6-6001
RT6-6002
RT6-6003
RT8-6001
RT8-6002
RANGE
1
2
3
4
1
2
3
1
2
3
1
2
SPRING SET
NUMBER
100 – 175
175 – 275
250 – 350
325 – 500
500 – 850
800 – 1700
1600 – 3000
1000 – 2700
2500 – 5000
4000 – 8500
4000 – 9500
6000 – 15500