BRAND Hydraulics HP STYLE HAND OPERATED PUMPS - Manual

B
Certificate #02.002.1
ISO 9001:2000 WITH DESIGN
Revision 05-12
1.84"
[46.7]
1.48"
[37.7]
1/4" NPT RETURN PORT
(RP, OPTIONAL)
YD ICS
3.25"
[82.5]
3.41" [86.6]
4.05" [103.0] 4.05" [103.0]
3.50" [88.9]
3.25" [82.5]
4X Ш0
.28" [Ш7
.1]
#6 SAE OUTLET
50 CU. IN.
65 CU. IN.
80 CU. IN.
95 CU. IN.
6"
[1
52.4]
2"
[5
0.8]
8"
[2
03.2]
10
"[
254] 12
"[
304
.8]
OUTLET
20
"[
508]
RELEASE VALVE
FILL PLUG
(1/4" NPT)
BODY
TANK
COVER
TL (1/4" NPT PORT)
ADJUSTABLE RELIEF
6.
75
"
[171.5]
3/4" PIPE
DIMENSIONS LISTED ARE THE SAME FOR ALL THREE PUMP SERIES
(HP61DA SHOWN)
BRA
S.N.
P.N.
INSTALLATION SHEET FOR
HP STYLE HAND OPERATED PUMPS
KEEP WITH PRODUCT UNTIL INSTALLED
ADDITIONAL SHEETS MAY BE PRINTED OUT FROM OUR WEBSITE WWW.BRAND-HYD.COM UNDER PRODUCT CATALOG SECTION
Can I paint my pump? – Painting valves is okay as long as the all ports are properly plugged and piston is masked.
Pump will not pump – First, make sure the release valve is closed. After that, make sure the relief setting is high enough for
the application.
How do I adjust the relief? – Begin by loosening the 9/16” [14.3mm] nut; then using a 5/32” [4.0mm] Allen wrench, turn the
screw clockwise to increase the pressure. One (1) full turn is ~1000psi [68.9 bars].
What is my Hand Pump relief factory setting? – The settings are:

HP121 – 2,000psi [137.9 bar]

HP61 – 3,000psi [206.8 bar]

HP22 – 4,000psi [275.8 bar]
Figure 1: Dimensional Data for HP style hand pumps in inches & [millimeters].