BRAND Hydraulics B300 NON-ADJUSTABLE COMBINER - Manual

04/14
3.87" [98.4]
4.56" [115.9]
1
.9
1
"
[4
8
.4
]
4
.5
4
"
[1
1
5
.3
] 2X Ш
17
64
" [Ш6.7]
INLET
INLET
OUTLET
1
.8
7
"
[4
7
.6
]
0.94" [23.8]
1.88" [47.6]
B300 NON-ADJUSTABLE COMBINER
INSTALLATION & USER GUIDE
SPECIFICATIONS:
• Rated for 3000 psi (207 bar).
• Rated for 1-16 gpm (3.8-60.6 lpm).
• 20-Micron filtration recommended.
• Weight 4.8 lbs. (2.2 kg).
• Standard port sizes.
-
1/2” NPT all ports.
MOUNTING INSTRUCTIONS:

Mounting – Valve can be mounted in any orientation. Valve must be mounted on a flat surface. Special attention should
be paid to not bend or twist the casting when mounting. Doing so may cause the combiner spool to bind, causing valve to
fail. It is recommended to install washers between casting and mounting surface.
FREQUENTLY ASKED QUESTIONS:
Q: What happens if I block one inlet port?
A: The combiner spool will try to open more flow to the blocked port. This in turn will block off flow to the other port.
GENERAL INFORMATION:
Pipe Thread Sealant - Warranty is void when Teflon tape is used to seal pipe threads. This is because Teflon tape is a
friction reducing agent which allows customers to over-torque fittings. We recommend using a sealant that does not include
friction reducing agents i.e. Lead Plate.
DIMENSIONAL DATA: