Bird B Gone Shock Track for Birds - Manual (Page 7)

7
SHOCK TRACK
INSTALLATION INSTRUCTIONS
Attaching Shock Track Connectors:
Step 6 Attaching Sections of Shock Track:
Shock Track Connector ST­CTR10 1. Slide end of Shock Track into Connector Base; Slide
end of new track into other side of connector base.
2. Snap top of Shock Track Connector in place (apply pressure to insure full contact of pins)
3. Apply Adhesive under connection and under rest of Shock Track.
Attaching T­Connections:
2. Using lead in wire, attach Shock
Track power connector to all four
wires.
3. Slide power connectors over tabs of
Shock Track Connector.
1. Cut a 3­4” section of track and attach Shock Track Connector
as in Step 6 “Attaching Connectors”.