Bird B Gone Shock Track for Birds - Manual (Page 2)

2
SHOCK TRACK
INSTALLATION INSTRUCTIONS
CAUTION – READ BEFORE STARTING INSTALLATION!
Bird­B­Gone’s Shock Track is a low profile electric track system that is easy to install with some
basic electrical knowledge. To be used on an flat surface in an open area where birds may be loafing.
(Example: window ledges, parapet walls, open beams, etc.) As with all Bird­B­Gone products if you
have any questions please call our technical support @
1­800­392­6915.
PRIOR TO INSTALLATION:
1. Determine the width of area to be covered to calculate number of rows required.
2. Determine type of charger to be used (Direct Wire or Solar).
a. Tape Measure
b. Pencil or Pen
c. Utility Knife
d. Scissors
e. Voltage Tester
f. Crimping Tool
g. Pliers
h. Wire Cutter/ Stripping Tool
i. Polyurethane Construction Adhesive & Caulking Gun
¨ Be sure to use a polyurethane adhesive to secure Shock Track to the mounting
surface. Approximately 1 tube per 25 feet of track.
WARNING: Electric track systems should not be used if contact with
flammable liquids, vapors, or fumes is possible. Electric track systems
should never be used in and around gas stations.
DO NOT INSTALL SHOCK TRACK WHERE IT MAY COME INTO CONTACT WITH
PEOPLE.