Bird B Gone Shock Track for Birds - Manual (Page 5)

5
Step 4 Installing Shock Track Mounting Clips:
Screw or glue mounting clips every three feet on mounting surface. Place a dab of
adhesive to top of clip and insert track.
Mounting Clips
Attach Mounting Clips Every 3 Feet.
SHOCK TRACK
INSTALLATION INSTRUCTIONS
¨ Be sure to use a polyurethane adhesive to secure Shock Track to the mounting
surface. Approximately 1 tube per 25 feet of track.
Install Shock Track Mounting Clips before installing the Shock
· Shock Track Mounting Clips
should be mounted to the surface
as close to the outside edge as
possible.
· Shock Track Mounting Clips should
be spaced no more than 3 ft. apart.
· Attach Mounting Clips with
· We recommend Bird­B­Gone
Adhesive ADE61.
· Product will attach best if both
screws and adhesive are used.
· Be sure to allow enough time for
Mounting Clips to set up before
installing the track into the
mounting clips.