Bird B Gone Shock Track for Birds - Manual (Page 4)

4
SHOCK TRACK
INSTALLATION INSTRUCTIONS
Step 2 Preparing Surface for Installation:
Remove all loose debris and bird droppings. Surface
should be thoroughly cleaned and disinfected using
Bird­B­Gone’s Disinfectant DIS­SQ8.
For Single Side Ledges/ Surfaces (i.e. ledges that
have a back wall, window, etc.):
1” – 12” Use 1 Row of Shock Track
13” – 24” Use 2 Rows of Shock Track
25” – 36” Use 3 Rows of Shock Track
For Double Sided Ledges/ Surfaces (i.e. parapet walls, etc.),
you will need to run a row on each side of the surface, as close
to the edges as possible. Use the following chart for the
number of rows:
1” – 4” Use 1 Row of Shock Track on Each
Side.
4” – 15”
Use 2 Rows of Shock Track on Each
Side.
16” – 28” Use 3 Rows of Shock Track on Each Side.
Step 3 : Determine Number of Rows: