Bird B Gone Bird Slope - Manual

Bird Slope Installation Instructions:
Description:
Bird Slope is an anti-perching, anti-roosting, pest bird
deterrent that is effective against all types of birds.
Applications:
Ledges: Bird Slope mounted on
a ledge turns it into an area that
pest birds cannot land. Creates a
“slippery slope”.
Eaves: Mounted upside down with
special mounting clips, the bird slope creates a slippery area that swallows
cannot attach their mud nests to.
Bird Slope Specifications
Ž Each piece of slope is 4’ long, and
will cover a ledge 6” wide
Ž Effective against all bird species
Ž U.V. Protected PVC - Sun & Weather Resistant!
Ž Easy to Install End Caps!
Ž Glue trough on underside for easy
adhesive application
Installation:
Before installation, the area being treated should be cleaned
off and dried. The base of the slope is 2 ¾” wide, and can be
glued down with an outdoor polyurethane adhesive. There are glue troughs on the underside of the slope.
End Caps can be glued into place at the “end” of each slope
application; this will prevent birds from getting behind the
slope itself.
The basic bird deterrent slope, without an extender can treat
a ledge 6” wide, there are extenders that can be attached for
ledges up to 10” wide.
There are also mounting clips available for vertical
installation on the sides of buildings.
7”
4’
Professional Bird Control Products
Since 1992!
For More Information
www.birdbgone.com
1-800-392-6915 1-800-392-6915