B&K Precision 1823A - Manual - Manual (Page 2)

2
Introduction
Thank you for purchasing our product. Electronic measuring instruments
produced by us are high technology products made under strict quality control.
We guarantee their exceptional precision and utmost reliability. For proper use of
the product, please read this operation manual carefully.
Note
1. To fully maintain the precision and reliability of the product use it within the
range of standard setting (temperature 10

C~35

C, humidity 45%~85%)
2. After turning of power, please allow a pre-heating period of as long as some
30 minutes before use.
3. This equipment should be used with a triple line power cord for safety.
4. For quality improvement the exterior design and specification of the product
can be changed without prior notice.
5. If you have further questions concerning use, please contact our service
center or sales outlet.
Safety Summary
Please take a moment to read these operating instructions thoroughly and
completely before operating this instrument. Pay particular attention to
WARNINGS used for conditions and actions that pose hazard to the user and
CAUTIONS used for conditions and actions that may damage the instrument.
 Always to inspect the instrument and other accessories for any sign of
damage or abnormality before every use.
 Never ground yourself and keep your body isolated from ground.
 Never touch exposed wiring, connections or any live circuit conductors.
 Do not install substitute parts or perform any unauthorized modification to
the instrument.
 Use caution when working above 60V DC or 30V AC rms. Such voltages
pose a shock hazard.
 Remember that line voltage is present on some power input circuit points
such as on-off switches, fuse, power transformers, etc., even when the
equipment is turn off.
 Also, remember that high voltage may appear at unexpected points in
defective equipment.
Safety Symbols
DANGEROUS VOLTAGE
AC-ALTERNATING CURRENT
DC-DIRECT CURRENT
SEE EXPLANATION IN MANUAL
GROUND
FUSE