B&K Precision 602 - Manual - Manual (Page 4)

4
Section 2
Operation
2.1 FRONT PANEL CONTROLS
1. PRESS & HOLD POWER / SEL. AH KEY After you connect the BUT to the
battery analyzer, you need to press & hold this key to activate the battery analyzer.
After activation user can select the AH values as per BUT rating using this key.
2. UP KEY
This key is used to increase theAH values.
3. DOWN KEY
With this key, the user can decrease the AH values.
4. TEST KEY
On pressing this key the measurement will begin.
5. TEST REPEAT KEY
This key is used to repeat previously performed test.
6. REVERSE POLARITY
This LED glows when the battery is reverse connected.
7. LCD
This is 16x2 line alphanumeric display. It displays various messages & results of
tests as per AH value selected.
8/9. TEST LEADS
These are used to connect the BUT to the Battery Analyzer. The Red test lead is to be
connected to the +ve terminal of BUT & black is used to connect to the -ve termina