B&K Precision 2640 - Datasheet - Manual

w w w w w w..b bk k p prre ec c iis siio on n..c c o om m
Tel.: 714.921.9095
2.0 GHz Handheld RF Field Strength Meter
Model 2640
Cost effective RF field strength meter
with basic spectrum analyzer function
Technical data subject to change
© B&K Precision Corp. 2008
v031610
Data sheet
The B&K Precision model 2640 is a battery operated, hand-held RF
Field Strength Meter capable of measuring RF levels and electric field
strength. The synthesizer-based design provides you with reliable
measurements across a wide reception range of 100KHz to
2000MHz, a remarkably low noise floor of -110 dBm to detect weak
signals and basic spectrum analyzer functionality. The 2640 provides
field technicians and engineers with a cost-effective measurement tool
for basic signal investigations at only a fraction of the cost of a
full-featured conventional spectrum analyzer.
The 2640’s user-friendly interface combined with convenient presets
such as predefined filter settings and other special functions (e.g.
squelch) commonly used in analog communication systems make the
2640 easy to use. The B&K Precision 2640 supports RS 232C serial
communication and includes software that can control the instrument
from a personal computer. The user can save the instrument’s
measurement data on the PC for further analysis.
The handheld RF Field Strength Analyzer is an ideal tool for field
testing, installing and maintaining Mobile Telecommunications systems
Features
■ Battery-operated portability
■ 100KHz to 2GHz measurement range with a maximum
display span of 400MHz
■ Hand-held and battery operated portability
■ Built-in 2GHz frequency counter
■ Detects wide band (180KHz) and narrow band FM (12.5KHz),
AM & SSB (2.4KHz) signals
■ Phase-locked loop for precise frequency tuning
■ Up to 160 channels may be scanned and displayed
■ Audio output of the detected signal with built-in speaker
■ Detachable antenna included
■ Back-lit display
■ Storable setups and displays
■ RS-232 Interface
such as Cellular and Cordless Phone, CB Paging, Paging, Cable and
Satellite TV Systems as well as performing antenna site measurements
and maintenance.