B&K Precision 5492BGPIB - Datasheet - Manual (Page 5)

Period
Specifications (cont.)
5 w w w.bk prec ision.c om
True RMS Bench Multimeter
Model 5492B
v041014
Resolution, Full Scale Reading and Accuracy ± (% of reading + % of range), 23 °C ± 5 °C
ACV Range Period Ran ge Res olution
Fu ll Scale
Re ading
Accuracy (2 )
I nput Se nsitiv ity
(Sin e Wave )
100 mV
to
750 V
1 ~ 10 µs (1) 0.01 ns 9.99999 0.005 100 mVrms
10 µs ~ 10 ms 0.1 ns 9.99999 0.005 40 mVrms
10 ms ~ 100 ms 0.1 µs 99.9999 0.01 40 mVrms
100 ms ~ 200 ms 1 µs 199.999 0.05 200 mVrms
(1) If testing frequency is greater than 1MHz, it will be displayed but no specified accuracy is guaranteed.
(2) Specified accuracy at input >5 % of range.
Supplemental
Environmental
Operating Environ men t 0 °C to 40 °C, 32 ºF to 104 ºF
Storage En vironment -40 °C to 70 °C -40 ºF to 158 ºF
Hu midity ≤ 90 %RH
General
Remote Interfaces RS232, USB (virtual COM) GPIB (model 5492BGPIB only)
Measu reme nt Category CAT II 300V, CAT I 1000V, pollution degree 2
Math Fu nctions Rel, Max/Min/Average/StdDev (for stored readings), dB, dBm, Limit Test, % and mX+b
AC Input 110/220 V ± 10%, 50/60 Hz ± 5%
Powe r Cons umption ≤ 20 VA
Safety & EMC
EN 61010-1:2001, EN61326-1:2006 and
EN61326-2-1:2006
Dimen sions (W×H×D )
8.85” x 3.93 “ x 13.97”
(225 mm×100 mm×355 mm)
Ne t Weig ht 5.51 lbs (2.5 kg)
Three-Year Warranty
I ncluded Acce ssorie s
Test leads, AC power cord, spare fuse, user manual, USB cable, calibration certificate
and test report
Frequency
Resolution, Full Scale Reading and Accuracy ± (% of reading + % of range), 23 °C ± 5 °C
A CV
Range
Fre qu ency Range R esolu tion
Fu ll Scale
Re ading
Accuracy (2 )
Input Sensi ti vity
(Sine Wave )
100 mV
to
750 V
5 ~ 10 Hz 10 µHz 9.99999 0.05 200 mVrms
10 ~ 100Hz 100 µHz 99.9999 0.01 40 mVrms
100 ~ 100 kHz 1 mHz 999.999 0.005 40 mVrms
100 k ~ 1 MHz (1) 1 Hz 999.999 0.005 100 mVrms
(1) If testing frequency is greater than 1MHz, it will be displayed but no specified accuracy is guaranteed.
(2) Specified accuracy at input >5 % of range.
Gate Time at 1 Sec.
Input protection: 750 Vrms or 500 Vdc
Gate Time at 1 Sec.
Input protection: 750 Vrms or 500 Vdc