B&K Precision 2510 Series - Datasheet - Manual (Page 5)

www.bkprecision.com
Handheld Digital Storage Oscilloscopes
2510 Series
5
Models 2511 2512 2515 2516
Performance Characteristics
Bandwidth 60 MHz 100 MHz 60 MHz 100 MHz
Real Time Sampling Rate 1 GSa/s (half-channel interleaved) (1) , 500 MSa/s (per channel)
Channels 2 non-isolated 2 isolated
Rise Time < 5.8 ns < 3.5 ns < 5.8 ns < 3.5 ns
Ch-to-Ch Isolation (both
channels at same V/div setting)
> 100:1 at 50 MHz
Memory Depth 40 kpts (half-channel interleaved) (1)(2) , 20 kpts (per channel)
Deep Memory (3) 2 Mpts (half-channel interleaved) (1) , 1 Mpts (per channel)
Vertical Resolution 8 bits
Vertical Sensitivity 2 mV/div – 100 V/div (1-2-5 order) 5 mV/div – 100 V/div (1-2-5 order)
DC Gain Accuracy
5 mV/div-100 V/div: ≤ ± 3 %
2 mV/div: ≤ ± 4 %
5 mV/div-100 V/div: ≤ ± 3 %
Max. BNC Input Voltage CATII 300 Vrms from BNC signal to BNC shell
Max. Input Voltage for Probe
PR150SA (4) : 1x/10x CAT II 300 V
PR250SA (5)(6) : 10x CAT III 600 V, CATII 1000 V
Channel Voltage Offset Range
2 mV - 200 mV : ±1.6 V
206 mV - 10 V : ±40 V
10.2 V - 100 V : ±400 V
5 mV - 200 mV : ±1.6 V
206 mV - 10 V : ±40 V
10.2 V - 100 V : ±400 V
Bandwidth Limit 20 MHz (-3 dB)
Horizontal Scan Range 5.0 nS/div - 50 S/div 2.5 nS/div - 50 S/div 5.0 nS/div - 50 S/div 2.5 nS/div - 50 S/div
Timebase Accuracy ± 50 ppm measured over 1 ms interval
Input Coupling AC, DC, GND
Input Impedance 1 MΩ +/- 2 % || 18 pF ± 3 pF 1 MΩ +/- 2 % || 16 pF ± 3 pF
Probe Attenuation Selectable Factors 1X, 5X, 10X, 50X, 100X, 500X, 1000X
Vertical and Horizontal Zoom Vertically or horizontally expand or compress a live or stopped waveform
I/O Interface
USB
USB host port support USB flash drives (FAT format)
mini-USB device port for PC connectivity and probe compensation
Acquisition Modes
Sampling Display sample data only
Peak Detect Capture the maximum and minimum values of a signal
Average Waveform averaged, selectable from 4, 16, 32, 64, 128, 256
Trigger System
Trigger Types
Edge, Pulse Width, Video*, Slope, Alternative
*Support signal formats: PAL/SECAM, NTSC
Trigger condition: odd field, even field, all lines, or line number
Trigger Modes Auto, Normal, Single
Trigger Coupling AC, DC, LF reject, HF reject
Trigger Source CH1, CH2
Trigger Level Range ± 6 divisions from center of display
Trigger Displacement
Pre-trigger: Memory depth / 2* sampling
Delay Trigger: 268.04 div
Pulse Width Trigger Positive slope (>, <, =), Negative slope (>, <, =), Time: 20 ns - 10 s
Slope Trigger Positive slope (>, <, =), Negative slope (>, <, =), Time: 20 ns - 10 s
Alternate Trigger
CH1 trigger type: Edge, Pulse, Video, Slope
CH2 trigger type: Edge, Pulse, Video, Slope
Digital Storage Oscilloscope Specifications