B&K Precision 4013B - Manual - Manual (Page 7)

7
Harmonic Distortion DC – 100 kHz, -55 dBc
100 kHz – 1 MHz, -45 dBc
1MHz – 7 MHz, -30 dBc DC – 100 kHz, -55 dBc
100 kHz – 1 MHz, -45 dBc
1MHz – 12 MHz, -30 dBc
Square Rise/Fall Time
< 20 ns (10% to 90% at full amplitude into 50 Ω)
Variable Duty Cycle 20% to 80 %, up to 1 MHz for Square waveform
Symmetry Accuracy at 50% < 1 %
Sweep Characteristics
Sweep Shape
Linear or Logarithmic, up or down
Sweep Time 20 ms to 100 s
Input and Output
Sync Out
TTL pulse at programmed frequency
; 50 Ω source impedance
General
Memory Storage
Store up to 9 instrument settings
Power Requirements 100 V – 240 V AC ± 10% (90 V – 264 VAC)
Max. Power Consumption 25 VA
Operating Temperature 0 °C – 50 °C
Storage Temperature -10 °C – 70 °C
Humidity 95% RH, 0 °C – 30 °C
Dimensions 213 mm x 88 mm x 210 mm (WxHxD)
Weight Approx. 2 kg
Safety Standards EN55011 for radiated and conducted emissions
EN55082
EN61010
*Depends on amplitude setting.
Note: All specifications apply to the unit after a temperature stabilization time of 15 minutes
over an ambient temperature range of 23 °C ± 5 °C. Specifications are subject to change
without notice.
To ensure the most current version of this manual, please download the latest version here:
http://www.bkprecision.com/search/4013B
For current up-to-date product information, please visit
www.bkprecision.com