Autel Maxivideo MV101 - Manual (Page 9)

8
3. Installation
3.1 Battery Removal and Installation
NOTE: If the power indicator light is blinking continuously, this
reminds you to replace batteries in time as instructed.
Fig.6
1) Turn the handheld display unit upside down to expose the battery
compartment cap and screw. (Fig. 6)
2) Use a screwdriver to remove screw and battery compartment cap.
3) Battery removal and installation.
Fig. 7
 To remove the batteries, hold handheld display unit to remove the
battery compartment and then remove batteries.(Fig. 7)
 To install the batteries, remove the battery compartment and insert
four (4) new AA batteries into the proper slots in the battery
compartment.