Autel Maxivideo MV101 - Manual (Page 15)

14
2
NOTE: Please check following methods to avoid injury.
 FOR WALLS:
For inspecting the inside walls, be sure to shut
off the circuit breaker to the whole house before using the tool.
 FOR PIPES:
If you suspect a metal pipe could contain an
electric charge, have a qualified electrician to check the pipe
before using.

2
FOR AUTOMOBILES: Be sure the automobile is not running
during inspection. Metal and liquid under the hood may be hot.
4.3 Battery Precautions
 Remove the batteries while cleaning the tool.
 Remove the batteries before storing the tool for a long period of
time to prevent battery leakage from damaging battery
compartment.
 When necessary, replace all four (4) batteries with new ones.
 Use only the size and type of batteries specified.
 Be sure to install batteries with the correct polarity as indicated
in the battery compartment.\
 Properly dispose of batteries. Exposure to high temperatures can
cause batteries to explode. Do not dispose in fire.
4.4 Maintenance Instructions
NOTE: Make sure the batteries have been removed from the tool
before performing maintenance.
 Tool maintenance must be performed only by qualified repair
personnel. Maintenance performed by unqualified repair
personnel could cause injury.
 When maintaining, use only identical replacement components.

Do not attempt to take any pieces of the tool apart unless directed
by the manual.
 Follow instructions to replace accessories.

Do not use acetone to clean the tool. Instead, use alcohol. Avoid
rubbing too hard on the LCD screen. After using, wipe the
display unit clean gently with a dry cloth.