Autel Maxivideo MV101 - Manual (Page 14)

13
4.2 Operation Precautions
CAUTION: CAUTION: Do not put the tool into anything or anywhere
that may contain a live electrical charge.
 Do not operate the tool unless the user’s manual has been read
thoroughly and proper training has been completed.
 Do not immerse the handheld display unit in water. Reduce the
risk of electric shock and damage.
 Do not use the tool if condensation forms inside the imager head.
Let the water evaporate before using again.
 Do not use excessive force to insert or withdraw the cable.
 Do not use the imager head and cable to modify surroundings,
clear pathways or clogged areas.
 The handheld display unit is not waterproof. The imager head and
its cover are waterproof, but not acid-proof or fireproof. Avoid
submersing the imager head into corrosive, oily places and be
sure to keep the imager head away from high temperature objects.
 Do not put the imager head and cable into anything or anywhere
that may contain a live electrical charge.
 If the tool does not work well after turning it on. Please take
batteries out and do not use. Please have the tool checked by a
qualified technician. Any tool that cannot be controlled with the
power button is dangerous and must be repaired.
 Store idle components out of the reach of children and other
untrained persons.
 Maintain the tool with care. Properly maintained tools are less
likely to cause injury.
 If the tool is dropped, check for the breakage and any other
conditions that may affect its operation.

Use only accessories that are recommended by the manufacturer
of the tool.

Dry your hands when operating the tool or replacing batteries.

Protect against excessive heat. The tool should be kept away from
heat sources such as radiators, stoves or others that produce heat.

Store the tool in ventilated and dry places.